Jump to content
  • 0
Sign in to follow this  
Graxa

Disguise Event (No Correct Answer) Need Help

Question

Hello Guys, does anyone here encountered a problem about disguise event? i have a problem there's no error on my server or any warning, and when we try to answer all monster, still no winner.

i am using SVN rA17709

 

npc/custom/events/disguise.txt

 

//===== rAthena Script =======================================//= Disguise Event//===== By: ==================================================//= GmOcean//===== Current Version: =====================================//= 5.1//===== Compatible With: =====================================//= rAthena Project//===== Description: =========================================//= Guess a monster name correctly for prizes.//= //= NOTE: Requires PCRE library installed.//===== Additional Comments: =================================//= 5.0 Last update by GmOcean.//= 5.1 Cleaned and standardized, mostly. [Euphy]//============================================================prontera,160,155,4	script	Disguise Event	795,{	// Currently set to run every two hours.	// To change times, edit the OnClock labels below.	set .@GMLevel,60;	// GM level required to access NPC.	set .@n$,"[^0000FFDisguise NPC^000000]";	if (getgmlevel()>=.@GMLevel) {		mes .@n$;		mes "Select an option.";		next;		switch(select("Turn ON/OFF Event:Event Settings")) {		case 1:			mes .@n$;			if (.EventON) {				mes "The Event is currently: [^0000FFON^000000]";				mes "Would you like to turn it OFF?";			} else {				mes "The Event is currently: [^FF0000OFF^000000]";				mes "Would you like to turn it ON?";			}			if(select("Yes:No")==2) close;			if (.EventON) {				set .EventON,0; set .Timer,0;				setnpctimer 0; stopnpctimer;				announce "A GM has decided to turn the Disguise Event off. As a result no further prizes will be given.",bc_map | bc_blue;				deletepset 1;				setnpcdisplay "Disguise Event",795;				close;			}			set .EventON,1; set .Timer,1; setnpctimer 0; initnpctimer;			set .ResetCounter,.ResetCounter+1;			announce "The Disguise Event will begin in 3 minutes.",bc_all | bc_blue;			announce "The Event is being held in Prontera.",bc_all | bc_blue;			close;		case 2:			mes .@n$;			mes "Pick a setting to modify.";			next;			switch(select("Monster Display:Number of Rounds:Prize Settings")) {			case 1:				setarray .@r$[0],"Disguise as all monsters.","Disguise as MVPs only.";				mes .@n$;				mes "Choose a disguise rule.";				next;				set .Rule, select(implode(.@r$,":"));				mes .@n$;				mes "The Disguise Rule has been set:";				mes "  > ^0055FF"+.@r$[.Rule-1]+"^000000";				close;			case 2:				mes .@n$;				mes "Input the number of rounds you want the event to last.";				mes "Current number: [^0000FF"+.Rounds+"^000000]";				next;				input .@Rounds;				set .Rounds,.@Rounds;				mes .@n$;				mes "The number of rounds has been changed to "+.Rounds+".";				close;			case 3:				mes .@n$;				mes "Input the Item ID of the prize given each round.";				mes "Current item: [^0000FF"+getitemname(.Prize)+"^000000] (ID #"+.Prize+")";				next;				input .@Prize;				mes .@n$;				if (getitemname(.@Prize)=="" || getitemname(.@Prize)=="null") {					mes "That item does not exist. Please try again.";					close;				}				set .Prize,.@Prize;				mes "Input the amount to be given.";				next;				input .@amount;				mes .@n$;				if (.@amount<=0 || .@amount>=10000) {					mes "That amount is invalid. Using default ammount of 1.";					set .@amount,1;					next;					mes .@n$;				}				set .PrizeAmt,.@amount;				mes "The Prize has been changed successfully.";				mes "Prize: "+.PrizeAmt+"x [^0000FF"+getitemname(.Prize)+"^000000]";				close;			}		}	}	if (.EventON) end;	mes .@n$;	mes "Welcome.";	mes "How may I be of assistance?";	if(select("Information:Nothing, just passing through.")==2) close;	next;	mes .@n$;	mes "This event is quite simple.";	mes "At the start of the event, I will";	mes "disguise myself as a random";	mes "monster. You have to shout";	mes "that monter's name out loud.";	next;	mes "If you are correct, you will receive";	mes "a prize. If not, keep trying!";	mes "That's all that there is to this event.";	close;OnInit:	set .EventON,0;	set .Wait,0;	set .Winner,0;	set .ResetCounter,0;	set .Rounds,10;	set .Prize,512;	set .PrizeAmt,1;	set .Rule,1;	setarray .MVP[0],1038,1039,1046,1059,1086,1087,1112,1115,1147,1150,1157,1159,1190,1251,1252,1272,1312,1373,	                  1389,1399,1418,1492,1502,1511,1583,1623,1630,1646,1647,1648,1649,1650,1651,1658,1685,1688,				   1708,1719,1734,1751,1768,1779,1785,1802,1832,1871,1874,1885,1917,1980,2022,2068,2087,2131,				   2156,2165;	set .BlackList$, "1003,1006,1017,1021,1022,1027,1043,1075,1136,1137,1168," + 	    "1171,1172,1173,1181,1187,1210,1217,1218,1222,1223,1224,1225,1226,1227,1228," + 	    "1233,1284,1407,1411,1414,1495,1501,1900,1996,2000,2001,2002,2003,2004," + 	    "2005,2006,2007,2011,2012,2025,2028,2029,2030,2031,2032,2033,2034,2035," + 	    "2036,2037,2038,2039,2040,2041,2042,2043,2044,2045,2046,2047,2048,2049," + 	    "2050,2051,2052,2053,2054,2055,2056,2057,2058,2059,2060,2061,2062,2063," + 	    "2064,2065,2066,2067,2075,2076,2077,2078,2079,2080,2081,2083,2084,2085," + 	    "2086,2087,2088,2089,2090,2091,2092,2093,2094,2095,2096,2097,2098,2099," + 	    "2100,2101,2012,2103,2104,2105,2106,2107,2108,2109,2110,2111,2112,2113," + 	    "2114,2115,2116,2117,2118,2119,2120,2121,2123,2124,2125,1496,";	end;OnClock0000:OnClock0200:OnClock0400:OnClock0600:OnClock0800:OnClock1000:OnClock1200:OnClock1400:OnClock1600:OnClock1800:OnClock2000:OnClock2200:	set .ResetCounter,.ResetCounter+1;	set .EventON,1;	set .Timer,1;	set .Wait,1;	announce "The Disguise Event will begin in 3 minutes.",bc_all | bc_blue;	announce "The Event is being held in Prontera.",bc_all | bc_blue;	setnpctimer 0;	initnpctimer;	end;OnTimer10000:	if (.Timer || .Change) end;	set .Wait,0;	goto iDisguise;	end;OnTimer30000:	if (.Timer) end;	set .Change,0;	setnpcdisplay "Disguise Event",795;	npctalk "You took too long to guess what I was. Please wait 10 seconds while I disguise again.";	specialeffect EF_DETECT2;	set $MonsterName$,"";	deletepset 1;	stopnpctimer;	setnpctimer 0;	initnpctimer;	end;OnTimer60000:	if (.Timer!=1) end;	announce "The Disguise Event will begin in 2 minutes.",bc_all | bc_blue;	announce "The Event is being held in Prontera.",bc_all | bc_blue;	end;OnTimer120000:	if (.Timer!=1) end;	announce "The Disguise Event will begin 1 minute.",bc_all | bc_blue;	announce "The Event is being held in Prontera.",bc_all | bc_blue;	end;OnTimer180000:	if (.Timer!=1) end;	announce "The Disguise Event has begun!",bc_all | bc_blue;	announce "The Event is being held in Prontera.",bc_all | bc_blue;	set .Timer,0; stopnpctimer;	setnpctimer 0; initnpctimer;iDisguise:	if (.Rule==1) {		set .Winner,0;		set .Monster,1000+rand(1,995);		if (compare(","+.BlackList$+"," , ","+.Monster+",")) goto iDisguise;		if (.Monster==.LastMonster) goto iDisguise;		set .LastMonster,.Monster;		set $MonsterName$,getmonsterinfo(.Monster,0);	}	if (.Rule==2) {		set .Winner,0;		set .Monster,rand(49);		set $MonsterName$,getmonsterinfo(.MVP[.Monster],0);	}	deletepset 1;	defpattern 1,"([^:]+):.s*"+$MonsterName$+".*", "iCorrect";	activatepset 1;	if (.Rule==1) setnpcdisplay "Disguise Event",.Monster;	if (.Rule==2) setnpcdisplay "Disguise Event",.MVP[.Monster];	set .Change,1;	setnpctimer 0;	end;iCorrect:	if (.Winner) {		dispbottom "Someone has already won this round.";		end;	}	set .Winner,1;	set .RoundCount,.RoundCount+1;	deletepset 1;	activatepset 1;	getitem .Prize,.PrizeAmt;	announce strcharinfo(0)+" is correct! I was disguised as: "+$MonsterName$+"",bc_map | bc_blue;	if (.RoundCount>=.Rounds) {		setnpcdisplay "Disguise Event",795;		set .RoundCount,0; set .Change,0; set .EventON,0;		setnpctimer 0; stopnpctimer;		npctalk "Thank you all for playing. That was the last round of the Disguise Event. Come play again later.";		end;	}	setnpcdisplay "Disguise Event",795;	set .Change,0;	setnpctimer 0;	end;}

 

-THanks in advance

post-2640-0-04320800-1440600799_thumb.jpg

Share this post


Link to post
Share on other sites

6 answers to this question

Recommended Posts

  • 0

Probably already checked but, is this server live? You need to make sure your host has PERL installed. I've noticed a few people have been checking their local comps/work stations but the host doesn't have it.

 

So as a precaution try checking with them to see if they have support for it.

 

Edit: I forgot to mention that due to clients updating and certain langtype's being used in clientinfo.xml, you may just have an issue of 'password' recognition so to speak. Simply try adding a (Space) before your answers. This is a common issue with langtype's 1, 20 and 21 from what i've seen.

 

e.g:

poring = Server may not see as correct poring = Server may regonize this one though.

 

If this is the case for you, and adding a space before your answer makes it work, try changing server langtype to 0. This will affect how the client produces text.

Lastly if that still doesn't work, there are multiple posts here that have had this very same issue and have solved it by changing the script's PERL speech pattern.

I can't remember how to do it as it has been a few years. Sorry I couldn't be of much more help. Good luck.

Edited by GmOcean

Share this post


Link to post
Share on other sites
  • 0

Probably already checked but, is this server live? You need to make sure your host has PERL installed. I've noticed a few people have been checking their local comps/work stations but the host doesn't have it.

 

So as a precaution try checking with them to see if they have support for it.

 

Edit: I forgot to mention that due to clients updating and certain langtype's being used in clientinfo.xml, you may just have an issue of 'password' recognition so to speak. Simply try adding a (Space) before your answers. This is a common issue with langtype's 1, 20 and 21 from what i've seen.

 

e.g:

poring = Server may not see as correct poring = Server may regonize this one though.

 

If this is the case for you, and adding a space before your answer makes it work, try changing server langtype to 0. This will affect how the client produces text.

Lastly if that still doesn't work, there are multiple posts here that have had this very same issue and have solved it by changing the script's PERL speech pattern.

I can't remember how to do it as it has been a few years. Sorry I couldn't be of much more help. Good luck.

 

 

Thanks sir, i just change my langtype to 1, thanks  you for this :)

Share this post


Link to post
Share on other sites
  • 0

 

Probably already checked but, is this server live? You need to make sure your host has PERL installed. I've noticed a few people have been checking their local comps/work stations but the host doesn't have it.

 

So as a precaution try checking with them to see if they have support for it.

 

Edit: I forgot to mention that due to clients updating and certain langtype's being used in clientinfo.xml, you may just have an issue of 'password' recognition so to speak. Simply try adding a (Space) before your answers. This is a common issue with langtype's 1, 20 and 21 from what i've seen.

 

e.g:

poring = Server may not see as correct poring = Server may regonize this one though.

 

If this is the case for you, and adding a space before your answer makes it work, try changing server langtype to 0. This will affect how the client produces text.

Lastly if that still doesn't work, there are multiple posts here that have had this very same issue and have solved it by changing the script's PERL speech pattern.

I can't remember how to do it as it has been a few years. Sorry I couldn't be of much more help. Good luck.

 

 

Thanks sir, i just change my langtype to 1, thanks  you for this :)

 

Hey , 

I also have this problem, where do I change the server langtype? Is it the clientinfo.xml (I though this is a client)?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.