can someone help me about this?
- Thread starter Kei
- Start date
I don't get what you're trying to do, could you please elaborate more?
Also, are you sure a script wouldn't cover you better for warping a player when certain conditions are met instead of a source edit?
Also, are you sure a script wouldn't cover you better for warping a player when certain conditions are met instead of a source edit?
Last edited by a moderator:
well i need it to teleport me to the map i desired example i set it to prontera .. then if i execute the command it will warp me directly to prontera.
yes script will do.. but i need it for my custom commands
This command will take the invoking character to the specified map, and if
wanted, specified coordinates too, but these can be random.
warp "place",50,55;
This would take them to X 50 Y 55 on the map called "place". If your X and
Y coordinates land on an unwalkable map square, it will send the warped
character to a random place. Same will happen if they are both zero:
warp "place",0,0;
Notice that while warping people to coordinates 0,0 will normally get them
into a random place, it's not certain to always be so. Darned if I know
where this is actually coded, it might be that this happens because square
0,0 is unwalkable on all official maps. Beware if you're using custom maps.
There are also three special 'map names' you can use:
"Random" will warp the player randomly on the current map.
"Save" and "SavePoint" will warp the player back to their save point.
---------------------------------------
wanted, specified coordinates too, but these can be random.
warp "place",50,55;
This would take them to X 50 Y 55 on the map called "place". If your X and
Y coordinates land on an unwalkable map square, it will send the warped
character to a random place. Same will happen if they are both zero:
warp "place",0,0;
Notice that while warping people to coordinates 0,0 will normally get them
into a random place, it's not certain to always be so. Darned if I know
where this is actually coded, it might be that this happens because square
0,0 is unwalkable on all official maps. Beware if you're using custom maps.
There are also three special 'map names' you can use:
"Random" will warp the player randomly on the current map.
"Save" and "SavePoint" will warp the player back to their save point.
---------------------------------------
This command is similar to 'warp', however, it will not refer to the
invoking character, but instead, all characters within a specified area,
defined by the x1/y1-x2/y2 square, will be warped. Nobody outside the area
will be affected, including the activating character, if they are outside
the area.
areawarp "place",10,10,120,120,"place2",150,150;
Everyone that is in the area between X 10 Y 10 and X 120 Y 120, in a
square shape, on the map called "place", will be affected, and warped to
"place2" X 150 Y 150.
areawarp "place",10,10,120,120,"place2",0,0;
By using ,0,0; as the destination coordinates it will take all the
characters in the affected area to a random set of co-ordinates on the
"place2" map.
areawarp "place",10,10,120,120,"place2",150,150,200,200;
By using the optional x4 and y4 parameters, the destination coordinates
will be a random place within the defined x3/y3-x4/y4 square.
Like 'warp', areawarp will also explicitly warp characters randomly into
the current map if you give the 'to map name' as "Random".
See also 'warp'.
---------------------------------------
invoking character, but instead, all characters within a specified area,
defined by the x1/y1-x2/y2 square, will be warped. Nobody outside the area
will be affected, including the activating character, if they are outside
the area.
areawarp "place",10,10,120,120,"place2",150,150;
Everyone that is in the area between X 10 Y 10 and X 120 Y 120, in a
square shape, on the map called "place", will be affected, and warped to
"place2" X 150 Y 150.
areawarp "place",10,10,120,120,"place2",0,0;
By using ,0,0; as the destination coordinates it will take all the
characters in the affected area to a random set of co-ordinates on the
"place2" map.
areawarp "place",10,10,120,120,"place2",150,150,200,200;
By using the optional x4 and y4 parameters, the destination coordinates
will be a random place within the defined x3/y3-x4/y4 square.
Like 'warp', areawarp will also explicitly warp characters randomly into
the current map if you give the 'to map name' as "Random".
See also 'warp'.
---------------------------------------
Warps a party to specified map and coordinate given the party ID, which
you can get with getcharid(1). You can also request another party id given
a member's name with getcharid(1,<player_name>
.
You can use the following "map names" for special warping behavior:
Random: All party members are randomly warped in their current map
(as if they all used a fly wing).
SavePointAll: All party members are warped to their respective save point.
SavePoint: All party members are warped to the save point of the
currently attached player (will fail if there's no player
attached).
Leader: All party members are warped to the leader's position. The
leader must be online and in the current map-server for this
to work.
If you specify a from_mapname, warpparty will only affect those on that
map.
Example:
mes "[Party Warper]";
mes "Here you go!";
close2;
set @id,getcharid(1);
warpparty "prontera",150,100,@id;
close;
---------------------------------------
you can get with getcharid(1). You can also request another party id given
a member's name with getcharid(1,<player_name>
.You can use the following "map names" for special warping behavior:
Random: All party members are randomly warped in their current map
(as if they all used a fly wing).
SavePointAll: All party members are warped to their respective save point.
SavePoint: All party members are warped to the save point of the
currently attached player (will fail if there's no player
attached).
Leader: All party members are warped to the leader's position. The
leader must be online and in the current map-server for this
to work.
If you specify a from_mapname, warpparty will only affect those on that
map.
Example:
mes "[Party Warper]";
mes "Here you go!";
close2;
set @id,getcharid(1);
warpparty "prontera",150,100,@id;
close;
---------------------------------------
Warps another player to specified map and coordinate given the char id,
which you can get with getcharid(0,<player_name>. Obviously this is
useless if you want to warp the same player that is executing this script,
unless it's some kind of "chosen" script.
Example:
warpchar "prontera",150,100,150001;
---------------------------------------
which you can get with getcharid(0,<player_name>
. Obviously this is useless if you want to warp the same player that is executing this script,
unless it's some kind of "chosen" script.
Example:
warpchar "prontera",150,100,150001;
---------------------------------------
Warps a guild to specified map and coordinate given the guild id, which
you can get with getcharid(2). You can also request another guild id given
the member's name with getcharid(2,<player_name>.
You can use the following "map names" for special warping behavior:
Random: All guild members are randomly warped in their current map
(as if they all used a fly wing)
SavePointAll: All guild members are warped to their respective save point.
SavePoint: All guild members are warped to the save point of the
currently attached player (will fail if there's no player
attached).
Example:
warpguild "prontera",x,y,Guild_ID;
---------------------------------------
you can get with getcharid(2). You can also request another guild id given
the member's name with getcharid(2,<player_name>
.You can use the following "map names" for special warping behavior:
Random: All guild members are randomly warped in their current map
(as if they all used a fly wing)
SavePointAll: All guild members are warped to their respective save point.
SavePoint: All guild members are warped to the save point of the
currently attached player (will fail if there's no player
attached).
Example:
warpguild "prontera",x,y,Guild_ID;
---------------------------------------
*warppartner("<map name>",<x>,<y>
This function will find the invoking character's marriage partner, if any,
and warp them to the map and coordinates given. Go kidnap that spouse.
It will return 1 upon success and 0 if the partner is not online, the
character is not married, or if there's no invoking character (no RID).
0,0 will, as usual, normally translate to random coordinates.
and warp them to the map and coordinates given. Go kidnap that spouse.
It will return 1 upon success and 0 if the partner is not online, the
character is not married, or if there's no invoking character (no RID).
0,0 will, as usual, normally translate to random coordinates.
You can use bindatcmd to create your new scripted commands to warp yourself wherever you want, or even put restrictions to current script commands before they get run.
You could script your restrictive @warp if that's what you can, or put the restrictions to it.
You could script your restrictive @warp if that's what you can, or put the restrictions to it.