hercules client errors :(

[examateur 0]

(I used 2014-02-05 client)

I just started learning how to make a server lately and I've gotten some problems

I have done all the steps and compiled hercules with PACKETVER 20140205

I used guide from here http://herc.ws/board/topic/8894-guide-setting-up-2013-client-for-hercules/ and here http://herc.ws/board/topic/968-guide-how-to-setup-hercules/

1) When I tried using client provided here http://herc.ws/board/topic/10666-release-2012-04-10-ragexere-full-client/, I was able to log in successfully, with some problems:

 

 

When about to start client: pic #1 (Untitled.png)

 

when about to use skills: pic#2 (Untitled2.png)

some skills are exceptions though: pic#3

 

even some classes (some 3rd + Adv) cause endless error too (had to end process to close)

 

I guess the reason is that the original datas are old (2012 ?) and therefore lots of files are missing

Anyway, I'm happy that I could start the client and successfully log in.

 

2) However, after copying the 2014-02-05bRagexe_patched to kRO folder obtained from https://www.nickyzai.com/?p=kro, it didn't work. I thought because clientinfo.xml was missing. So I downloaded files from here http://herc.ws/board/topic/398-client-translation-project/ and copied them to RO folder . Yet it didn't work. No errors were prompted in the login char window

 

 

pic#4

 

The server couldn't even recognize the client was there.

 

Why is that? It worked on the old client just fine but not the lastest kRO from nickyzai.com

 

 And I did config the DATA.INI for 1) and 2). The only difference between the 2 is that the 1) has YourRO.grf but the 2) does not.

 

I'd be appreciated if anyone can help 

 

(mmo.h in pic#5)

Edited December 30, 2015 by examateur

[Dastgir 1246]

http://herc.ws/board/topic/398-client-translation-project/

Place data folder inside grf, and system folder should be in RO folder(outside grf)

Pic1-4 are because of lua files

[examateur 0]

http://herc.ws/board/topic/398-client-translation-project/

Place data folder inside grf, and system folder should be in RO folder(outside grf)

Pic1-4 are because of lua files

Thank you a lot. The lua errors are not there anymore and I was able to use it with latest kRO client. Apparently, only the prontera map still has error, it crashed when I @go 0, others were fine. May I know how to fix this?

[xlaws27 3]

 

http://herc.ws/board/topic/398-client-translation-project/

Place data folder inside grf, and system folder should be in RO folder(outside grf)

Pic1-4 are because of lua files

Thank you a lot. The lua errors are not there anymore and I was able to use it with latest kRO client. Apparently, only the prontera map still has error, it crashed when I @go 0, others were fine. May I know how to fix this?

 

 

if u're stuck in 3% loading then u should download this

 

http://herc.ws/board/topic/8513-old-prontera/

[examateur 0]

 

 

http://herc.ws/board/topic/398-client-translation-project/

Place data folder inside grf, and system folder should be in RO folder(outside grf)

Pic1-4 are because of lua files

Thank you a lot. The lua errors are not there anymore and I was able to use it with latest kRO client. Apparently, only the prontera map still has error, it crashed when I @go 0, others were fine. May I know how to fix this?

 

 

if u're stuck in 3% loading then u should download this

 

http://herc.ws/board/topic/8513-old-prontera/

ok thanks for your help. But the translated iteminfo.lua from http://herc.ws/board/topic/398-client-translation-project/ didn't work. I had to change it to http://subversion.assembla.com/svn/ClientSide/Lua_Project/System/itemInfo.lua . I wonder why